Discrete 2 Of 5 (D 2 Of 5); Enable/Disable Discrete 2 Of 5; Set Lengths For Discrete 2 Of 5 - Symbol LS3400 Product Reference Manual

6 - 36 LS3400 Product Reference Guide

Discrete 2 of 5 (D 2 of 5)

Enable/Disable Discrete 2 of 5

To enable or disable Discrete 2 of 5, scan the appropriate bar code below.

Set Lengths for Discrete 2 of 5

The length of a code refers to the number of characters (i.e., human readable characters), including check
digit(s) the code contains. Lengths for D 2 of 5 may be set for any length, one or two discrete lengths, or
lengths within a specific range.
One Discrete Length - This option allows the scanner to decode only those D 2 of 5 symbols containing a
selected length. Lengths are selected from the numeric bar codes in
example, to decode only D 2 of 5 symbols with 14 characters, scan D 2 of 5 - One Discrete Length, then scan
1 followed by 4. In case of an error, or to change the selection, scan
Enable Discrete 2 of 5
*
Disable Discrete 2 of 5
D 2 of 5 - One Discrete Length
Appendix D, Numeric Bar Codes. For
Cancel on page D-3.