3.
Remove the four Phillips PM2.5×4.5 screws (1) that secure the display assembly to the
base enclosure.
4.
Remove the display assembly (2).
5.
If it is necessary to replace the display bezel or any of the display assembly subcomponents:
a.
Flex the inside edges of the top edge (1), the left and right sides (2), and the bottom
edge (3) of the display bezel until the bezel disengages from the display enclosure.
b.
Remove the display bezel (4).
The display bezel is available using spare part number 730544-001.
68
Chapter 6 Removal and replacement procedures for Customer Self- Repair parts