HP EliteBook 820 G1 Maintenance And Service Manual page 68

8. Swing the rear edge of the keyboard (3) up and forward until it rests upside down on the
palm rest.
NOTE:
9. Release the zero insertion force (ZIF) connector (1) to which the backlight cable is attached, and
then disconnect the backlight cable (2) from the system board.
10. Release the ZIF connector (3) to which the keyboard cable is attached, and then disconnect the
keyboard cable (4) from the system board.
11. Release the ZIF connector (5) to which the pointing stick cable is attached, and then disconnect
the pointing stick cable (6) from the system board.
60 Chapter 5 Removal and replacement procedures for Customer Self- Repair parts
Step 9 applies only to computer models equipped with a keyboard with backlight.