Memory Module - HP EliteBook 820 G1 Maintenance And Service Manual

Memory module

Description
8 GB (PCL3, 12800, 1600-MHz)
4 GB (PCL3, 12800, 1600-MHz)
Before removing the memory module, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the service cover (see
5.
Remove the battery (see
Remove the memory module:
1. Spread the retaining tabs (1) on each side of the memory module slot to release the memory
module. (The memory module tilts up.)
2. Remove the memory module (2) by pulling the module away from the slot at an angle.
Reverse this procedure to install a memory module.
Service cover on page
Battery on page 44).
42).
Component replacement procedures
Spare part number
693374-001
691740-001
55