Advanced Menu; Memory Configuration Menu - NEC EXPRESS5800/120Lf User Manual

Advanced Menu

Feature
Memory Configuration
PCI Configuration
I/O Device/peripheral
Configuration
Advanced Chipset
Control
Boot-time Diagnostic
Screen
Reset Configuration
Data
Installed O/S
Numlock
Memory/Processor Error

Memory Configuration Menu

Feature
Memory Group #1 Status
Memory Group #2 Status
Memory Group #3 Status
Memory Retest
Extended RAM Step
3-8 Configuring Your System
Description Your Setting
Select sub-menu.
Select sub-menu.
Select sub-menu.
Select sub-menu.
Disabled
If enabled, the BIOS will display
Enabled the OEM logo during POST.
This option is hidden if the BIOS
does not detect a valid logo in
the flash area reserved for this
purpose.
No Select 'Yes' if you want to clear
Yes the System configuration Data
during next boot. Automatically
reset to 'No' in next boot.
Other If PnP O/S is selected, only the
PnP O/S devices required to boot the
system are configured.
If Other is selected, all devices
are configured.
On Sets power on Numlock state.
Off
Boot
Selects the behavior of the
Halt system in response to a Memory
or Processor reconfiguration. If
set to Boot, the system will
attempt to boot. If set to Halt, the
system will require user
intervention to complete booting.
Choices or
Display Only Description
Normal Displays the current status of
Not Installed the memory bank. Disabled
Disabled indicates that a DIMM in the
bank has failed and the entire
bank has been disabled.
No
Causes BIOS to retest all
Yes memory on next boot.
Disabled Selects the size of step to use
1 MB during Extended RAM tests.
1 KB
Every- Location
Your Setting
Your Setting