Table of Contents
Advertisement
3. Insert the fan module and push it in until its tabs are fully seated in their
corresponding holes in the chassis (see Figure 4-8). Make sure the fan
module is oriented for the direction of airflow and that the fan cables coming
from the fan module are not restricted in any way. The fan cable must be
routed through the slot in the fan module.
4. Reinstall the fan cover on the fan module. See Installing the Fan Cover
earlier in this chapter.
Note:
securely.
6. Reinstall the left-hand side access panel on the system chassis. See Installing
the Side Access Panel earlier in this chapter.
7. Plug in the system power cord(s) and power up the system.
4-10 Upgrading Your System
Ensure that the cover is installed properly and
Figure 4-8. Installing the Fan Module
Advertisement
Table of Contents
Troubleshooting
