Rear View - NEC EXPRESS5800/120Lf User Manual

Rear View

Figure 2-10 shows the location of the system's rear connectors, I/O ports, and
indicator.
Note
300-Watt power supply a power supply module is provided
containing up to two 350-Watt power supply units. Each
power supply unit contains a power supply status LED
indicator. See Table 2-2 for a list and description of the
350-Watt Power Supply Status LED Panel indicator later in
this chapter.
A AC input power connector
Ultra-160 SCSI Connector
B
C Serial Port B
D 66 MHz, 64-bit PCI Slots
E 33 MHz, 32-bit PCI Slots
F 66 MHz, 64-bit PCI Slots
G LAN1 connector
H LAN2 connector
I VGA connector
J Printer port
K Serial Port A
L Stacked USB Ports
M Keyboard port
N Mouse port
: For hot-swap systems in place of the single
N
M
L
K
J
I
H
G
F
E
D
Supplies AC power to the power supply
Connects to External SCSI Devices
COM2 serial port 9-pin connector (Turquoise)
Two 66 MHz, 64-bit PCI add-in board slot locations
Two 33 MHz, 32-bit PCI add-in board slot locations
Two 66 MHz, 64-bit PCI add-in board slot locations
RJ-45 Ethernet connector
RJ-45 Ethernet connector
VGA monitor 15-pin connector (Blue)
Parallel port 25-pin connector (Burgundy)
COM1 serial port 9-pin connector (Turquoise)
USB1, USB2, and USB3 connectors (Black)
PS/2-compatible 6-pin mini-DIN connector (Purple)
PS/2-compatible 6-pin mini-DIN connector (Green)
Figure 2-10. Rear Features and Controls
A
Setting Up the System 2-17
B
C