NEC EXPRESS5800/120Lf User Manual page 49

A Load/eject button, CD-ROM reader
B Activity LED, CD-ROM reader
C Eject button, 3 ½-inch diskette drive
D Activity LED, 3 ½-inch diskette drive
E USB port
F Status LED
G Power/Sleep Status LED
H Hard drive activity
I Power button
J Sleep Button
K LAN #2 activity LED
L LAN #1 activity LED
M Reset button
Figure 2-7. Front System Controls, Indicators, and I/O Port (Non-Hot-Swap Bays)
Press to load CD and eject CD.
When lit, CD-ROM reader is in use.
Press to eject diskette.
When lit, diskette is in use.
Front USB connector
When green, the system is ready. See Table 2-1
for a list and description of the system LEDs.
When green, power is present in the system and
system is not in Sleep Mode. See Table
2-1 for a list and description of the system LEDs.
When green, hard drive is active. See Table
2-1 for a list and description of the system LEDs.
Press to turn system DC power on or off.
Press to enter power saving (sleep) mode. Press
again to enter normal mode of operation. (This
function requires a corresponding operating
system.)
When green, system is linked. See Table
2-1 for a list and description of the system LEDs.
When green, system is linked. See Table
2-1 for a list and description of the system LEDs.
Resets the system.
(Continued)
Setting Up the System 2-13