11
Hook lubrication (for PFAFF 1183 only)
.05.09
Requirement
1. The centrifugal disk 1 must be positioned 1.5 mm in front of the oil ring 3.
2. When the machine is running at full speed, after approx. 10 seconds a mark should
be made by a fine stripe of oil on the strip of paper placed over the needle plate cutout.
2
Fig. 11 - 10
Move the centrifugal disk 1 (screw 2) according to requirement 1.
Check requirement 2. If necessary, move centrifugal disk 1.
3
1
The adjustment is only necessary if the wick has been replaced.
When replacing the wick, make sure that the new wick is impregnated with oil.
Adjustment
11 - 11