Adjusting The Thread Trimmers -900/22 And -900/24; Magnet Setting - Pfaff 1053 Instruction Manual

11

Adjusting the thread trimmers -900/22 and -900/24

.06
11

Magnet setting

.06.01
Requirement
1. The distance between the bottom edge of the plunger and the top edge of the
washer 5 must be 96 mm.
2. When the thread trimmer is in resting position (magnet retracted), the roller lever 6
must rest against bolt 7 and be at a distance of approx. 0.1 mm from roller 8.
Fig. 11 - 20
Turn plunger 1 (nut 2) according to requirement 1.
Bring thread trimmer into resting position.
Move magnet holder 3 (screws 4) according to requirement 2.
6
7
8
Adjustment
4
3
2
1
5
4
11 - 21