Adjustment
11
Thread tension release
.06.06
11 - 26
Requirement
When the release olive 3 is resting on the highest point of the cam 4, the distance
between the tension disks 7 must be at least 0.5 mm.
2
0.5 mm
7
Fig. 11 - 25
Press the roller of the roller level 1 over the magnet into the lowest point of the control
cam 2.
Turn the hand wheel in the rotating direction until the release olive 3 is resting on the
highest point of the cam 4.
Turn screw 5 (nut 6) according to the requirement.
1
6
4
3
5