Winding The Bobbin Thread/ Adjusting The Thread Tension - Pfaff 1053 Instruction Manual

9 Winding the bobbin thread, adjusting the thread tension
.02
3
Fig. 9 - 02
Place an empty bobbin 1 onto bobbin shaft 2.
Thread the bobbin in accordance with Fig. 9-02 and wind it anti-clockwise around bobbin
1 a few times.
Switch on the bobbin winder while at the same time pressing bobbin winder spindle 2
and lever 3.
The tension of the thread on bobbin 1 can be adjusted with knurled screw 4.
The bobbin winder stops automatically when bobbin 1 is full.
If the thread is wound unevenly:
Loosen nut 5.
Turn thread guide 6 accordingly.
Tighten nut 5.
1
2
The bobbin fills up during sewing.
Preparation
4
-
+
6
5
9 - 2