Travis Industries Flex-95 Owner's Manual page 61

REPLACEMENT PARTS AND REMOVAL INSTRUCTIONS
(Continued)
Removing and Replacing the Firebricks (Continued)
REMOVING THE BAFFLE (TOP) FIREBRICKS & COMPONENTS (Cont.)
Back Row of
Baffle Firebrick
Rear
Baffle
Support
Ledge at
rear of
firebox
4. With the rear baffle firebricks removed, the rear baffle support can be slid backwards approximately
one inch. This will allow the forward baffle firebricks to be slid out through the space between the
front and rear baffle support.
5. The front and rear baffle support angles can be removed at this time if they need removal.
6. To replace the baffle components, follow the directions in reverse order.
TOP VIEW OF REAR BAFFLE FIREBRICKS
First, slide
the firebrick
to the side of
the firebox.
Twist the brick so
Rotate the
that it is on end and
back end down.
then feed it out.
Page 61