Storing Wood - Travis Industries Flex-95 Owner's Manual

OPERATING YOUR APPLIANCE (Continued)
Seasoning Wood (Continued)
The bathroom scales can be used to check if firewood is still seasoning. Weigh a basket or bag of a few
pieces of firewood. Place them back in the wood pile as an identified unit. Then weigh them again in
about a month. If they have lost weight, the wood is still drying. Cracks that appear in the end of logs are
good signs that the wood is well seasoned.
Generally, wood that is 1) cut to length, 2) split, and 3) stacked in the open, preferably with a cover, during
the winter, should be thoroughly seasoned by the next heating season.

Storing Wood

Firewood is best stored outdoors, under cover and near the house so that valuable space in the house is
not used, insects are kept outside, and the dirt problem is reduced. Store the wood under cover to keep it
dry and its fuel value high. It can be stored in a wood shed, utility building, garage or under a sheet of
plastic or sheet metal roofing.
When drying wood, the greater the surface area exposed to the air, the more rapid the drying. Wood
greater than 8" in diameter or longer than 4' dries very slowly. Reduce the size of such sticks by splitting
and/or sawing. Be sure to keep an air space between the wood and any covering. Stack the wood in
loose piles that are raised off the ground. This will promote air circulation that helps dry the wood.
Sheet Metal Roofing
TYPICAL WOOD SHED
2x6x12 Rafter
2x8x8' Girder
4x4x2 Posts Spaced 8' Apart
8' Width
3' Depth
Page 48
2x4 Purlins
Siding and Girts
(Optional)