Call Forwarding; Using Variable Call Forwarding - Siemens HiPath 500 User Manual

Step by Step
Forwarding on
1=all calls
2=external calls only
3=internal calls only
Save
Forwarding off

Call forwarding

Using variable call forwarding

You can immediately forward internal or external calls to
different internal or external telephones (destinations).
(External destinations require special configuration in
the system.)
When call forwarding is active, a special dial tone
sounds when you lift the handset.
If DID DTMF is active (contact your service per-
sonnel), you can also forward calls to this desti-
nation.
Destinations: fax = 870, DID = 871, fax DID = 872.
The call forwarding key flashes if you are a call
forwarding destination
Special features must be taken into consider-
ation if your telephone operates with
HiPath 5000 (system networking via PC net-
work)
r
Press the key shown.
or
c
Open the idle menu
Select and confirm the option shown.
Confirm,
or
select and confirm the option shown,
or
select and confirm the option shown.
j
Enter the destination number.
Confirm.
Deactivating call forwarding
r
Press the key shown.
or
Select and confirm the option shown.
page 17.
page 117!
page 23.
Basic functions
41