Assigning A Station Number (Not For U.s.); Associated Dialing/Dialing Aid - Siemens HiPath 500 User Manual

Enhanced phone functions
Step by Step
Calls
Rufnr. zuweisen
Associated dial
58

Assigning a station number (not for U.S.)

If this function has been configured (contact your ser-
vice personnel), you can selectively assign a specific
number (DID number) to your telephone before making
an external call. The assigned number then appears on
the called party's display.
N
Open the Program/Service menu
Select and confirm the option shown.
[1]
Confirm .
j
Enter the DID number you wish to use.
j
Dial the external number.

Associated dialing/dialing aid

If this function has been configured (contact your ser-
vice personnel), you can use a dialing aid to dial num-
bers and set up calls for your telephone.
The operating procedure depends on whether the dial-
ing aid is connected to the S
You can also use your system telephone as a dialing aid
for other telephones.
Dialing aid on the S
On the PC, select a destination and start dialing.
^
The speaker on your telephone is switched on. Lift the
handset when the other party answers.
Dialing aid at the a/b (T/R) port:
On the PC, select a destination and start dialing.
"Lift the handset" appears on the PC screen.
^
Lift the handset.
Dialing aid from your telephone for another tele-
phone:
N
Open the Program/Service menu
Select and confirm the option shown.
j
Enter the internal station number ("Dial for:").
[1] "Differing display view in a HiPath 4000 environment (not for
HiPath 500)"
bus or the a/b (T/R) port.
0
bus:
0
page 127
page 28.
page 28.