About This Manual - Toshiba e-studio 45 Operator's Manual

Introduction
xi About this manual
The TOSHIBA GA-1040
This manual is intended for anyone who is responsible for integrating the TOSHIBA
GA-1040 into a business environment that includes networked personal computers.
After you set up the TOSHIBA GA-1040 and client workstations as described in this
manual and in Getting Started, individual users can print to the TOSHIBA GA-1040
as a high-performance printer.
The term "GA-1040" is used in this manual to refer to the TOSHIBA
N :
OTE
GA-1040.
The following icons are used in this manual:
Indicates features that require the PostScript option.
Indicates features that require a hard disk drive.

About this manual

This manual includes guidelines on the following topics:
• Basic configuration of the GA-1040 to support printing over AppleTalk, TCP/IP
and IPX (Novell) networks
• Setting up a parallel port connection
• Configuring Novell and Windows NT 4.0 servers to provide GA-1040 printing
services
• Administering network printing
• Using the GA-1040 in mixed network environments
The network guidelines in this manual are not intended to replace the services
N :
OTE
of an experienced network engineer.
™
is a special-purpose controller built into the copier.