Filters - Hoover Vacuum Cleaner Owner's Manual

Dirt Cup (cont.)
How to Empty
4-2
A
Press dirt cup release button (A) and pivot
cup out.
Place bottom of dirt
4-4
cup into cleaner
body first. Pivot cup
into cleaner body.

Filters

Cyclonic Filter Assembly: How to Clean
Disconnect cleaner from electrical outlet. Do not use cleaner without dirt cup or filters in place.
4-6
A
Remove dirt cup as described in Fig. 4-2.
Twist filter assembly (A) counterclockwise.
Remove assembly from dirt cup.
4-3
B
A
Holding dirt cup over trash receptacle, press
dirt cup door release button (A) to open dirt
cup door (B).
Close door and press dirt cup door release
button to latch dirt cup door closed.
Press on dirt cup
4-5
release button while
firmly pressing on
dirt cup.
Release button in
order for it to return
to proper position
and lock the dirt
cup into place.
4-7
A
C
Dirt and debris can be cleaned from the
filter assembly by brushing with the cleaner's
combination tool.
Place the filter assembly on the dirt cup,
aligning (3) tabs (A) on filter with (3) slots on
dirt cup (B) and twist it clockwise to secure into
position. Press dirt cup door release button (C)
to latch dirt cup door closed.
Replace dirt cup as described in Figs. 4-4 & 4-5.
9
B