Table of Contents
Advertisement
Table 2.3: Descriptions for Figure 2.10
Number
1
2
3
4
Adding a Tiered Legacy Switch
Figure 2.11 illustrates a tiered legacy switch configuration.
To add a legacy switch (optional):
1
Mount the SCS into your rack. Locate a UTP cable (up to 30 meters) to
connect your switch to the legacy switch.
2
Attach one end of the UTP cabling to the ARI port on your switch.
3
Connect the other end of the UTP cable to a PS/2 SIP.
4
Connect the SIP to the legacy switch according to the switch
manufacturer's recommendations.
5
Repeat steps 1-4 for all the legacy switches you wish to attach to your
switch.
NOTE: The primary SCS supports only one switch per ARI port or USB port. You cannot
tier a switch to a tiered switch.
Description
Local User
ARI Connection
UTP Connection
ACI Connection (chain icon)
xxx
|
xxx
Installation
31
Advertisement
Table of Contents
