Creating A Serial Iq Module Macro - Dell Server Console Switch User Manual

• Break Key Sequence: This option allows you to configure the key
combination that generates a break condition. The default key sequence is
<Alt-B>.
To configure a serial IQ module:
1 Press <Ctrl-F8>. The Configuration Screen will appear.
2 Select a parameter to change. You can navigate the Configuration Screen
using the <Up Arrow> and <Down Arrow> keys.
3 Modify the selected value using the <Left Arrow> and <Right Arrow>
keys.
4 Repeat steps 2 and 3 to modify additional values.
5 Press <Enter> to save your changes and exit the Configuration Screen.
-or-
Press <Escape> to exit the Configuration Screen without saving the
changes.

Creating a Serial IQ Module Macro

Pressing the <Page Down> key when the Terminal Applications menu's
Configuration screen is displayed will provide access to the Macro Configuration
screen. The serial IQ module can be configured with up to 10 macros. Each
macro can be up to 128 characters in length.
To create a macro:
1 Select the serial IQ module you wish to configure and press <Ctrl-F8> to
activate the Terminal Applications menu's Configuration screen.
2 When the Terminal Applications menu appears, press <Page Down> to
view the Macro Configuration screen. The Macro Configuration screen
shows the 10 available macros and the associated key sequences, if any, for
each.
3 Using the <Up Arrow> and <Down Arrow> keys, scroll to an available
macro number and highlight the listed keystroke sequence. Type the new
Appendix C: Using Avocent Serial IQ Modules
xxx | xxx
118