Table of Contents
Advertisement
macro keystroke sequence over the default. Any combination of <Ctrl> or
<Alt> and a single key may be used. When you have finished entering the
keystroke sequence that will activate the new macro, press the <Down
Arrow> key.
4
On the line below the macro keystroke sequence you just entered, type the
keystroke sequence that you wish the macro to perform.
5
Repeat steps 3 and 4 to configure additional macros.
6
When finished, press <Enter> to return to the previous screen.
Using History Mode
History mode allows you to examine the contents of the history buffer, which
contains the events that have occurred.
The serial IQ module maintains a buffer containing 240 lines minimum, or 10
screens, of output. When the history buffer is full, it will add new lines at the
bottom of the buffer and delete the oldest lines at the top of the buffer.
NOTE: The Config Key Sequence, On-Line Key Sequence and Clear History Key
Sequence used in the following procedure are the default values. These key
combinations can be changed using the Terminal Applications menu.
To use History mode:
1
Press <Ctrl-F9>. The mode will display as History.
2
Press one of the following key combinations to perform the indicated
action:
•
Home: Move to the top of the buffer.
•
End: Move to the bottom of the buffer.
•
Page Up: Move up one buffer page.
•
Page Down: Move down one buffer page.
•
Up Arrow: Move up one buffer line.
•
Down Arrow: Move down one buffer line.
Appendix C: Using Avocent Serial IQ Modules
xxx
|
xxx
119
Advertisement
Table of Contents
