Transfer Switch - Briggs & Stratton Automatic Transfer Switch Installation & Operator's Manual

Home generator systems 200 amp automatic transfer switch with ac power control module
Table of Contents

Advertisement

Available languages

Available languages

Thank you for your purchase of this Briggs & Stratton Power Products Automatic Transfer Switch. This product is intended
for use with Briggs & Stratton Home Standby Generator sets and therefore may not function with generators produced by
other manufacturers. Seek a qualified electrical professional to determine applicability of this equipment to generators aside
from those manufactured by Briggs & Stratton. This is an optional home standby system which provides an alternate source
of electric power and to serve loads such as a gas furnace, refrigeration and communication systems that, when stopped
during any power outage, could cause discomfort, or the like. This product DOES NOT qualify for emergency standby as
defined by NFPA 70 (NEC).
This manual contains safety information to make you aware of the hazards and risks associated with transfer switches and
how to avoid them. Briggs & Stratton has made every effort to provide for a safe, streamlined and cost-effective installation.
Each installation is unique, it is impossible to know of and advise of all conceivable procedures and methods by which
installation might be achieved. We do not know all possible hazards and/or the results of each method or procedure. Save
these instructions for future reference.
This transfer switch requires installation before use. Refer to the Installation section of this manual for instructions on
installation procedures. Only licensed electrical contractors should install transfer switches. Installations must strictly
comply with all applicable federal, state and local codes, standards and regulations.
Where to Find Us
You never have to look far to find Briggs & Stratton support and service for your transfer switch. Consult your Yellow Pages.
There are many Briggs & Stratton authorized service dealers worldwide who provide quality service. You can also contact
Briggs & Stratton Customer Service by phone at (800) 743-4115, or on the Internet at BRIGGSandSTRATTON.COM.

Transfer Switch

Model Number
Revision
Serial Number
Date Purchased
Briggs & Stratton Power Products Group, LLC
900 North Parkway
Jefferson, WI 53549
Copyright © 2007 Briggs & Stratton Power Products Group,
LLC. All rights reserved. No part of this material may be
reproduced or transmitted in any form by any means without
the express written permission of Briggs & Stratton Power
Products Group, LLC.
2
BRIGGSandSTRATTON.COM

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents