Scale Operating Program - Sartorius TS 6100B Installation And Operating Instructions Manual

Scale Operating Program

In order to access the scale operating program, you will
need the .
The scale operating program enables you to change the
menu code settings for the weight unit, the individual
operating parameters for the scale, the display mode,
Update rate and the data output parameter, including the
parameter for the application mode.
At the factory, we have set the codes for the scale operat-
ing program so you do not need to make any changes if
you only want to use the "over/under check weighing"
mode under normal ambient conditions.
Any changes to the menu codes in the scale operat-
ing program will affect how the products are weighed.
To familiarize yourself with all of the performance capabili-
ties this scale offers, why not try out a few menu code
settings that sound interesting to you?
After all, you can always change them back to the original
settings.
Use the "codes" to select the desired function in the
menu of the scale operating program.
Each code consists of a left-hand number for the function
group and a right-hand number for a function within a
group.
23