Table of Contents
Advertisement
NVS440R User's Guide
" Time Setup
- Current
Time:
It displays the current time of NVS440R.
- Time Settings : Options for setting the
Options
"Synchronize With Computer Time"
"Set Manually"
5.5. Sensor & Capture Setup
This is the setup page for conditions of video capture. The video capture can be triggered either by activated
alarm sensor or motion detection as setup by this page. When the sensor is triggered the event is ported to the
NVR100 Software. Captured video of the event can be stored on the HDD of the NVS440R.
"
Sensor Setup
: Up to 4 external sensors can be connected to the NVS440R.
- Type Selection : Select sensor type. There are two sensor operating mode.
. Normal Open : Open circuit in normal operation. Closed circuit indicates alarm triggered condition.
. Normal Close : Closed circuit in normal operation. Open circuit indicates alarm triggered condition.
"
Video Capture Condition
1. Sensor : when at least one of the sensor detects a trigger event.
time manually or synchronize to the PC.
Synchronize the time with the PC time.
You can manually set the time.
Figure 5-7. Sensor & Capture Setup
: It sets which sensor will trigger video recording for channels 1-4. The NVS440R
supports 2 types of sensor event trigger.
- - - - 28
Description
28 - - - -
28
28
Advertisement
Table of Contents
