Motion Region Setup - Inscape Data AirGoggle NVS 440R User Manual

NVS440R User's Guide

5.7. Motion Region Setup

Set the motion detection regions. Up to 3 separate regions can be defined. After setup the motion detection
region, the corresponding selection in "Sensor & Capture Setup" ->"Video Capture Condition" -> "Motion
Detection Select" should be enabled, to activate the motion detection and generate the alarm condition.
"
Channel Selection : Choose the channel you wish to enable the motion detection feature.
"
Channel Sensitivity : Set the sensitivity in motion detection for each channel.
- 1 is the least sensitive and 66 is the most sensitive.
- Sensitivity values can be set to different values among different channels, but same sensitivity is applied
for the regions within the same channel.
"
Motion Region Setup : Set up to 3 motion detection region per each video channel
- Region 1, 2, or 3 : Motion detection is enabled for the channels by checking each box.
Figure 5-9. Motion Region Setup
- - - - 30 30 - - - - 30 30