Table of Contents
Advertisement
NVS440R User's Guide
shorts the two terminals providing a complete electrical path. Two Relay output interface, A
and B, are provided.
" Alarm Input : The 4 port alarm sensor input connections provides external alarm sensors such as infrared,
heat, or magnetic sensors.
" Power Connector: Accepts power of 12VDC and 3A
2.4. PC Requirements
Audio/Video monitoring and recording can be achieved with the use of NVR100 Software program
running on a PC. The Minimum PC requirement follows:
CPU
Memory
Operating system*
Web browser
Video Resolution
Network
* Operating Systems supported :
2.5 Quick Installation Guide
Brief information for rapid installation is provided in this section. For more detailed information you are
recommended to refer to pertinent documentations provided with the product or refer to Inscape Data's home
page (http://www.InscapeData.com).
1. Install "IP installer" and "NVR100 Software" on your PC.
Detailed information for installing these programs can be found in
[NVR100 Software User's
2. Assign an IP address to NVS440R via the IP installer software.
Identify the type of the network environment and set up an IP address accordingly. Detailed process of
setting up the IP address can be found in
Minimum
Pentium III 700
128 MB
Windows 98 SE.
Internet Explorer 5.0
1024 X 768
10 Base-T Ethernet
Windows 98 Second edition,
Windows NT Workstation 4.0 (SP 5.0 OVER)
Windows 2000 Professional
Windows XP Professional / Windows XP Home Edition
Guide], respectively.
[IP-Installer User's
- - - - 11
11 - - - -
11
11
Recommended
Pentium IV 1.8G above
256MB or more
Windows 2000 or later
Internet Explorer 5.0 or later
1600 X 1200
10/100 Base-T Ethernet
[IP-Installer User's Guide]
Guide]. If the network type is xDSL or
and
Advertisement
Table of Contents
