Step 4: Enter Network Settings - Socket 10/100 Ethernet CF Card User Manual

STEP 4: Enter Network Settings

You will need your completed Network Information Form for this step.
Pocket PC 2000/2002
1. Pocket PC 2000: Go to Start | Settings | Connections | Network.
Pocket PC 2002: Go to Start | Settings | Connections | Network Adapters.
2. In the Network Connections screen, select Socket 10-100 Driver. On a
Pocket PC 2002, tap on the Properties button.
3. In the next screens, enter your network settings from the Network
Information Form If needed, tap on the Name Servers tab to enter DNS
and WINS addresses.
If your LAN supports DHCP, select Use server-assigned IP address. If
needed, tap on the Name Servers tab to enter DNS and WINS
addresses.
Note: If using a static IP address, you may need to enter the host
computer's IP address in the WINS field to use ActiveSync.
When done, tap ok.
Important! If you forget to tap ok, your settings will not take effect!
4. Soft reset your Pocket PC by pressing the reset button.
CHAPTER 2: SETUP | 7