Socket 10/100 Ethernet CF Card User Manual page 11

Handheld PC Pros, Handheld PC 2000s and Pen Tablets
1. Go to Start | Settings | Control Panel | Network.
2. In the next screen, select Socket 10-100 Ethernet Driver. Tap Properties.
3. The IP Address screen will appear. Following your completed Network
Information Form, enter the appropriate settings for your network.
4. If needed, click on the Name Servers tab to enter any necessary DNS or
WINS addresses.
Note: If using a static IP address, you may need to enter the host
computer's IP address in the Primary WINS field to use ActiveSync.
5. When done entering all your network settings, tap OK.
Warning! Your new settings will not take effect if you forget to tap OK!
10 | CHAPTER 2: SETUP