Step 3: Install The Software - Socket 10/100 Ethernet CF Card User Manual

STEP 3: Install the Software

Follow these steps for software installation BEFORE inserting the 10/100
Ethernet CF Card:
1. Use your serial/Ethernet/USB cable or cradle to connect your mobile
computer to a host PC.
2. In order to synchronize data, there must be a partnership between the
mobile computer and host PC.
•
If you already established a partnership between the two computers,
they should automatically connect and begin synchronizing.
•
If no partnership exists between the two computers, a screen will
appear asking if you would like to set one up. Select Yes and click
Next>. Follow the remaining screens on your host PC until the
partnership has successfully been established.
Important! You must set up a partnership, or you will not be able to
synchronize data between your mobile computer and host PC!
3. Insert the Socket 10/100 Ethernet Installation Disc into the host PC.
CHAPTER 3: SETUP FOR WINDOWS CE | 5