Step 6: Use Activesync Via A Network - Socket 10/100 Ethernet CF Card User Manual

STEP 6: Use ActiveSync via a Network

Pocket PC 2000 or Handheld PC
1. If you installed Socket's software, after you insert the 10/100 Ethernet
CF Card and connect to a LAN, ActiveSync automatically launches:
Note: To access ActiveSync any time, go to
Pocket PC 2000: Start | Programs | Connections | ActiveSync.
HPC: Start | Programs | Communication | ActiveSync
2. Select Network Connection in the top drop-down list. Choose the
desktop computer you want to connect to in the bottom drop-down list,
then tap Connect.
Note: If Network Connection does not appear in the drop-down list, then
ActiveSync launched before your mobile computer had enough time to
recognize the card. You must increase how long your mobile computer
waits before auto-launching ActiveSync. For instructions, please refer
to the section on using the control panel applet at the end of this
chapter.
3. The mobile computer will start synchronizing. The Connection Status
screen will report when synchronization is done.
4. To stop ActiveSync, tap on the Disconnect button. You will still have
network access, but you will not be able to synchronize data.
12 | CHAPTER 2: SETUP
Important!
You must have a
partnership with a
host PC to use
ActiveSync!