Socket 10/100 Ethernet CF Card User Manual page 10

5. If you DO need to enter any IP addresses, tap on Socket 10-100 Driver.
6. In the next screens, enter your network settings from the Network
Information Form. Select Use specific IP address to enter any necessary
IP addresses.
If needed, tap on the Name Servers tab to enter DNS and WINS
addresses.
Note: If using a static IP address, you may need to enter the host
computer's IP address in the WINS field to use ActiveSync.
7. When you have finished entering settings, tap ok.
Important! If you forget to tap ok, your settings will not take effect!
8. A screen will report that the new settings will take effect when you next
insert the network card. Tap ok.
9. Soft reset your Pocket PC by pressing the reset button.
Note: Do not soft reset a Pocket PC 2003 when a Socket card is
inserted, or errors may occur in application(s) using the card. If errors
occur, remove the card and soft reset the device. Wait for the device
reset to finish before you re-insert the card.
CHAPTER 2: SETUP | 9