Chapter 2 Setup; Step 1: Register Your Card - Socket 10/100 Ethernet CF Card User Manual

Chapter 2 Setup

This chapter explains how to set up and use the 10/100 Ethernet CF Card
on a Pocket PC 2000/2002/2003, HPC 2000 or Handheld PC Pro.
Installation and Usage Steps Summary

STEP 1: Register your card.

STEP 2: Complete the Network Information Form.
STEP 3: Install the software.
STEP 4: Enter network settings.
STEP 5: Insert card and connect to LAN port.
STEP 6: Use ActiveSync via a Network
OPTONAL: Use the Control Panel Applet
STEP 1: Register Your Card
Socket highly recommends that all customers register their Socket products.
Registered users receive priority for technical support. Register your card
online at www.socketcom.com/prodreg.
When you register your card, you can request a free Crossover Connection
Kit. This kit enables you to create an instant Ethernet network without the
hassle of a bulky AC-powered hub. For more information about the
Crossover Connection kit, please see Appendix B: Two Node Networking.
Hubless network using Crossover Connection Kit
CHAPTER 2: SETUP | 3