Remote Control - Sanyo PLC-XM100 Owner's Manual

STAND-BY button
Turn the projector off (p.24).
WIRED REMOTE jack
Connect the remote control cable (not supplied) to
this jack when using as a wired remote control.
SIGNAL EMISSION indicator
Light red while a signal is being sent from the
remote control to the projector.
ON button
Turn the projector on (p.23).
AUTO PC button
Automatically adjust the computer image to its
optimum setting (pp.29, 37).
INPUT button
Select a signal (pp.33-35).
MENU button
Open or close the On-Screen Menu (p.25).
SCREEN button
Select the screen size (p.29).
POINT ( VOLUME – / +, MUTE) buttons
– Select an item or adjust the value in the On-
Screen Menu (p.25).
– Pan the image in Digital zoom + mode (p.43).
– Adjust the volume level (with Point
or mute the sound (with Point

Remote Control

MOUSE POINTER button
Move a pointer of the projector or a pointer for
wireless mouse operation (p.32).
SELECT button
– Execute the selected item (p.25).
– Expand or compress the image in the Digital
zoom mode (p.43).
SHUTTER button
Close and open up the built-in shutter (p.27).
INFO. button
Display the input source information (p.29).
L-CLICK button
Act as the left mouse button for wireless mouse
operation (p.32).
– Do not bend, drop, or expose the remote control to
moisture or heat.
– For cleaning, use a soft dry cloth. Do not apply
benzene, thinner, spray, or any other chemical
materials.
buttons)
button.) (p.28).
Part Names and Functions
To ensure safe operation, observe the following
precautions:
13