Setting 1; Setting 2 - Sanyo PLC-XM100 Owner's Manual

Chapter 4 Controlling the Projector

Setting 1

Item Description
Input button.......Sets the input search mode by pressing
the INPUT button of the projector and
the remote control. (Mode1, Mode2,
Mode3)
Background.........Sets the screen background when no
signal input. (Blue, User, Black)
Display....................Switches on or off the on-screen menu
display on the screen. (OFF, Countdown off, ON)
Countdown off .......Displays input image instead the countdown during the startup.
Logo .........................Sets on or off the logo display on the screen during the startup. (OFF, Default, User)

Setting 2

Item Description
Ceiling.....................Sets the image top/bottom and left/
right reversed. (ON, OFF)
Rear...........................Sets the image left/right reversed. (ON,
OFF)
Power
management .....Sets into the selected power manage-
ment mode (OFF, Ready, Shutdown) if
the input signal is interrupted and no
control key is pressed for the specified
period of time.
*The specified time can be set 1 to 30
min.
On start ..................Sets the power-on mode when the AC cord is connected to the outlet.
Lamp control......Selects lamp control mode. (Auto, Normal, Eco1, Eco2)
Lamp life
control ....................Selects lamp life control mode (Mode1, Mode2) when the total use time exceeds
the recommended total hours of use.
Remote control....Selects the remote control code. (Code1 - Code8)
Fan speed
control ....................Sets the running speed for the cooling fans. (Normal, Max)
40