Setting - Sanyo PLC-XM100 Owner's Manual

This projector has a Setting menu that allows you to set up the
other various functions described below.
1
Press the MENU button to display the On-Screen Menu.
2
selected item.
3
then press the SELECT button.
Language
The language used in the On-Screen Menu is available in English,
German, French, Italian, Spanish, Portuguese, Dutch, Swedish,
Russian, Chinese, Korean and Japanese.
Menu position
This function is used to change the position of the On-Screen Menu.
Select Menu position and press the SELECT button. The Menu
position screen appears.
The Menu position changes each time you press the SELECT button
as follows.
the top left the top right
bottom right the top left
Input button
This function detects the input signal automatically. When a signal is
of the following options.
Mode 1......Input search will not work.
Mode 2......Input search works under the following situation:
– When pressing the INPUT button on the side control.
or the remote control.
Mode 3......Input search works under the following situation:
– When turning on the projector by pressing the ON/
STAND-BY button on the side control or pressing the
ON button on the remote control.
– When pressing the INPUT button on the remote
control or on the side control.
- When no signal is detected.

Setting

Setting
Setting and press the
the center the bottom left
.....
Setting Menu
Language
the
Note:
•While Input button is set to Mode 3, and no signal is
detected, if the Shutter or Freeze function is active, cancel
it to activate the Input search.
•While Input button is set to Mode 1 or Mode 2, the status
of Input and Lamp are displayed every time the signal is
switched.
•Only the last selected input source can be detected.
•If the INPUT, INPUT 1, INPUT 2, INPUT 3, ON / STAND-
BY or MENU button is pressed during Input search is
in progress, Input search will stop and go back to the
previous input signal.
Language English
Menu position
Input button Mode 1
Display On
Background Blue
Logo
Lamp control
Filter control
Fan control Normal
Simple mode On
Remote control Mode 1
RC sensor Back
Power management Off
51