Setting 3 - Sanyo PLC-XM100 Owner's Manual

Setting 3

Item Description
Filter
counter(h) ............Displays the filter counter. Reset the
time after filter cartridge replacement.
Click "Reset", a confirmation display
appears, and then click "OK", the time
will be reset.
* Do not reset the Filter counter when
the filter cartridge is not replaced.
Scrolls
remaining.............Displays the scrolls remaining of the
filter. Reset the scroll counter after filter
cartridge replacement. Click "Reset",
a confirmation display appears, and
then click "OK", the time will be reset.
* Do not reset the Scrolls remaining
when the filter cartridge is not replaced.
Filter control .......Scroll the filter. Click "Roll-up", a confirmation display appears, and then click "OK", the
filter will be scrolled.
Filter warning.....Sets the time to indicate the filter warning message on the screen. (OFF, 400H, 700H,
1000H)
PJ lock
suspend .................When the projector has a security of PIN code lock, disable this function temporarily
by pressing Execute button.
Setting procedure
1. Turn off the projector , disconnect AC cord from the outlet and then connect AC cord again.
2. Access this page with the web browser.
3. Click Execute button on the PJ lock suspend.
* This function is disabled after the projector turns on.
Shutter....................Sets the shutter operation. (ON: close, OFF: open)
Shutter
management .....Sets the specified period of time when the projector shuts down after the projector
is left with the shutter closed.
* The specified time can be set 5 to 180 min.
Freeze......................Sets the image to freeze mode. (ON, OFF)
Factory default..........Sets all of the projector control items to the factory default setting except the fol-
lowing items.
Lamp Corres. Value, PJ time, Network PIN code, Network setting
* This function is not effective for the settings of Network address settings, e-mail
settings, etc.
Setting up the projector
41