Information - Sanyo PLC-XM100 Owner's Manual

Chapter 4 Controlling the Projector

Information

This page is to display the basic information of the projector status. Click
Information on the main menu.
Items
Input
System
Signal
Screen
Lamp status
Security
PJ time(h)
Lamp Corres. Value(h) Displays the use time (Corresponding value) of the lamp.
Filter time(h)
Filter condition
42
Click this button to
update the information.
Description
Displays selected input and source.
Displays selected signal system.
Input signal status (Yes, No)
Displays screen mode.
Displays lamp status with an icon. Refer to the table as shown in the next
page.
Displays the security (PIN code lock) status (Yes, No)
Displays the accumulated use time of the projector.
Displays the accumulated use time of the filter.
Displays filter status with an icon. Refer to the table as shown in the next
page.