Examples Of Connection - Sanyo PLC-XM100 Owner's Manual

Chapter 5 Appendix

Examples of connection

Peer-To-Peer connection
Connecting the projector (PJ01) to the control computer (PC05) directly.
Computer Name: PC05
IP Address : 192.168.0.5
Subnet Mask : 255.255.255.0
Default Gateway :
DNS :
Connecting the projector (PJ01) to the control computer (PC05) via the hub.
To another network
Computer Name: PC05
IP Address : 192.168.0.5
Subnet Mask : 255.255.255.0
Default Gateway :
DNS :
When the projector is connected to the computer directly without hub, the UTP cross cable
should be used.
46
* UTP cross cable
Hub
Computer Name: PC10
IP Address : 192.168.0.10
Subnet Mask : 255.255.255.0
Default Gateway :
DNS :
Projector Name: PJ01
IP Address : 192.168.0.2
Subnet Mask : 255.255.255.0
Default Gateway : 0.0.0.0
DNS : 0.0.0.0
Projector Name: PJ01
IP Address : 192.168.0.2
Subnet Mask : 255.255.255.0
Default Gateway : 0.0.0.0
DNS : 0.0.0.0