Table 2.4: S1 Panel Type Select; Tv-Out Interface (Optional) (Cn1) - Advantech PCM-9575 User Manual

S1 is an 8 segment DIP switch for DSTN/TFT panel type and resolution
functions.

Table 2.4: S1 Panel Type select

SW SW
1-1 1-2
ON ON
ON ON
ON ON
ON ON
ON OFF ON
ON OFF ON
ON OFF OFF ON
ON OFF OFF OFF
OFF ON
OFF ON
OFF ON
OFF ON
OFF OFF ON
OFF OFF ON
OFF OFF OFF ON
OFF OFF OFF OFF
* Default setting
** will support in the future

2.20 TV-out interface (optional) (CN1)

The PCM-9575 board provides optional TV-out via CN1. This consists of
a 5-pin wafer box header. Output supports composite video and S-video
connectors via an optional cable kit (p/n: 1103050306). TV-out genera-
tors use both NTSC and PAL formats.
To set up your video interface:
1. Run the appropriate installation program located on the utility disk.
That's all there is to it.
SW SW
1-3 1-4
ON ON
ON OFF
OFF ON
OFF OFF
ON
OFF
ON ON
ON OFF
OFF ON
OFF OFF
ON
OFF
Panel Type & Resolution
TFT 640x480**
TFT 648x480
TFT 648x480**
TFT 648x480**
DSTN 648x480**
TFT 800x600**
TFT 800x600*
TFT 800x600
TFT 800x600**
DSTN 800x600**
TFT 1024x768** 36bit (H. V. Freq)
TFT 1024x768
TFT 1024x768** LVDS
TFT 1024x768** N/A
DSTN 1024x768** 18bit
DSTN 1024x768** 24bit
21
18bit (H. V. Freq)
18bit (Synthetic)
N/A
LVDS
18bit
18bit (H. V. Freq)
18bit (Synthetic)
LVDS
N/A
18bit
36bit (Synthetic)
Chapter 2 Installation