Windows Nt Drivers Setup Procedure; Figure 4-14: Clicking The Change Button Within Display Type; Figure 4-13: Opening Display Type From The Windows Control Panel - Advantech PCA-6168 Manual

4.6

Windows NT Drivers Setup Procedure

Note: Before you install the VGA driver, make sure that you
are using service pack 3 (or above).
1. In the "Control Panel" screen, select the "Display" icon and click
"Display Type".

Figure 4-13: Opening Display Type from the Windows Control Panel

2. Click "Change".

Figure 4-14: Clicking the Change button within Display Type

Chapter 4 PCI SVGA Setup
59