Save The Configuration (Save); Restart Device (Reset Eia); Enable Debug; Enable Sip Debug (Deb Sip Msg All) - D-Link DVG‐6008G User Manual

Save the configuration (save)

Restart device (reset eia)

Enable debug

The command format is deb port + port number, to enable port 0 debug, as below:
To enable all ports debug, with the command "deb port all"
Without this steps, no trace logs will display on output window

Enable SIP debug (deb sip msg all)

5.4How to trace SIP logs

Create telnet session to gateway, the main steps as below:
Welcome to Command Shell!
Username:admin
Password:*****
ROS>en
ROS#
ROS#^config
ROS(config)#deb sip msg all
ROS(config)#ex
_______________________________________________________________________________
D-Link Corporation
DVG-6008G VoIP Gateway User Manual
82