Table of Contents
Advertisement
Table 4-12-3 Description of Port Configuration
Parameters
Port Configuration
ALL ports register
used same user ID
It is the account used for registration which provide by SIP server,
SIP User ID
Authenticate ID
Password
Tx Gain
Rx Gain
To VoIP Hotline
To PSTN Hotline
Auto-Dial Delay Time
_______________________________________________________________________________
D-Link Corporation
Used to configure ports' gain, Auto-Dial, etc.
The default is no. If set to "yes" ,all the ports will use the same user ID
to register to SIP server
equipment port's unique identifier
The Authentication ID is used for authentication purposes. The SIP
user ID is usually the phone number you received from the service
provider. Often, the Authentication ID is the same as the user
Password of SIP User ID which provide by SIP server
Tx Gain value of chipset. Adjusting it will effect volume on GSM side.
Rx Gain value of chipset. Adjusting it will effect volume on IP side.
When mobile / fixed line users make call to this port, gateway will auto
forward to dedicate number. The hotline could be DID / Ring Group /
Extension of SIP server / IP-PBX.
*Note: Please configureTel->IP Operation if you need this function.
When VoIP users make calls to this port, gateway will auto forward to
dedicate number. The Hotline number could be mobile / fixed line
number. Leave it blank if you don't need this function.
*Note: Please configureIP->Tel Operation if you need this function.
The auto-dial delay time of hotline , the range is 0-10 seconds
DVG-6008G VoIP Gateway User Manual
Description
ID
62
Advertisement
Table of Contents
