Network Configuration; Local Network - D-Link DVG‐6008G User Manual

4.5Network Configuration

4.5.1 Local Network

Parameters
Obtain IP
Enable the device obtain IP Address automatically or not. Default is
Address
enabling
Automatically
Use the
Configure the "IP Address", "Subnet Mask" and "Default Gateway" by
Following IP
manual
Address
Need ISP offer the account and password, Use this mode when there
PPPoE
is not router in the local network
MTU Message transmit unit, default is 1400
Obtain DNS
When enable the WAN port option of "Obtain DNS Server Address
Server Address
Automatically", which will be enabled subsequently.
Automatically
Use the
Following DNS Fill in the IP address of "Primary DNS Server" and "Secondary DNS
Server Server"
Addresses
_______________________________________________________________________________
D-Link Corporation
DVG-6008G VoIP Gateway User Manual
Figure 4-5-1 Local Network
Table 4-5-1 Local network
Description
20