Table of Contents
Advertisement
DPN-124G
Configuring Local Area Network
1. Go to the Connections Setup / LAN page.
2. If needed, change the IPv4 address of the gateway's LAN interface and
the mask of the local subnet. To do this, click the IPv4 tab and specify
needed values in the IP address and Subnet mask fields in the IP
section.
3. If needed, specify your own IPv6 address of the gateway's LAN interface.
To do this, click the IPv6 tab and select the Static value from the
Addressing Mode drop-down list in the IP section. Then specify the
needed value in the IP address field.
Quick Installation Guide
30
Advertisement
Table of Contents
