10.2 Cleaning the Steam Mop
Do not clean the Steam Mop or components with petrol or any other
flammable liquids, solvents, etc.
Use only a moist cloth and mild detergent for cleaning the Steam Mop.
Clean only the outside of the Steam Mop.
After cleaning, wipe off the moisture with a dry cloth.
Do Not place in water to clean.
11 Troubleshooting
No Steam.
A small amount of
water is ejected
instead of steam
Indicator Light will
not come on.
12 Wiring Diagram
Power Not Switched On.
Trigger in handle has not been
squeezed to turn the switch on.
No water in the tank.
Water Tank not attached.
This is normal when the element is
heat up.
Power Not Switched On.
Trigger in handle has not been
squeezed to turn the switch on.
Page 11 of 12
Switch On at power point.
Squeeze Trigger
Add water to the water tank.
Attach water tank
This is normal
Switch On at power point.
Squeeze Trigger