•
Fit the Short Screw into the hole on the back of the Steam Mop neck and
screw in tight
7
Micro Fibre Pad
•
To fit the Micro Fibre Pad, place the Micro Fibre Pad on the floor with the
fibre side facing out.
•
Loosen the Draw String.
•
Lift the steam mop up and position centrally over the Micro Fibre Pad and
then lower down.
•
Pull the Micro Fibre Pad up around the sides of the floor head and pull the
Draw String tight.
•
To remove the Micro Fibre Pad, ensure the steam mop is unplugged,
empty of water and cool, then reverse the method of fitting.
Note: Ensure the Micro Fibre Pad is fitted before use.
Page 7 of 12