Using On Carpets - Piranha CZ-901 User Manual

• At this time, start to push and pull the Steam Mop over the floor as if you
are vacuuming the floor.
• If you need to stop cleaning the floor i.e. you need to move an object, or
the phone rings, and steam is still being ejected from the base, press the
Trigger on the handle to turn off the pump and element.
Note: Always switch off and unplug the appliance when removing and
refitting the water tank.
8.1

Using on carpets

This appliance is supplied with a skid frame which allows you to use the
Steam Mop on carpets.
• To use this accessory, place the Skid Frame on the carpet and then place
the Steam Mop Head into the frame.
• Push and pull the Steam Mop over the carpet as if you are vacuuming the
floor.
• To remove the Skid Frame, just lift the Steam Mop up and out of the
Frame.
• Take care when touching the Skid Frame as it may be hot.
Page 9 of 12