Editing A Name In The List (W7 And W9 Control Heads Only) - Motorola ASTRO XTL 5000 User Manual

Editing a Name in the List
(W7 and W9 Control Heads Only)
The Selective Call and Call Alert page features share the same
prestored list of unit IDs.
1 Press and hold
ID list programming.
The Call indicator flashes and a high-pitched tone sounds.
2 Press the Mode rocker switch to locate the list member you
want to change.
OR
Use the numbered keys to go immediately to the location of a
member in the list. For example, press 2 to go to the second
member in the list; press 1 and 0 to go to the tenth member in
the list, and so on.
3 Press and hold
4 Change the characters or numbers using any of the numeric
keys (0 through 9) and special function keys
*
( , #).
Note: The maximum number of characters permitted in a text line
is 8 for W7 Control Head and 11 for W9 Control Head. If you
try to add too many characters, you will hear a low-pitched
tone.
To edit, do any or all of the following:
• To enter a character at the blinking cursor, refer to the table
on page 49.
Press the key of the desired character the number of times
shown in the table. For example, to enter the character C,
press the 2 key three times.
ASTRO XTL 5000 Digital Mobile Radio with W4, W5, W7, and W9
,
Call Page
to select the name- editing function.
Sel
General Radio Features
, or to enter Call
2Pge
55