Programming A Scan List - Motorola ASTRO XTL 5000 User Manual

General Radio Features

Programming a Scan List

To program a scan list, operator-selectable scan list members first
must be enabled in the radio programming by a qualified radio
technician.
Adding a Channel to the Scan List
1 Press and hold
good-key chirp is heard.
2 Using the Mode knob (W4) or Mode rocker switch (W5, W7,
W9), locate the channel to be added.
Note: If the desired channel resides in a different zone, press the
Zone up
use the mode changer to find the desired channel.
3 Press
Sel
4 Scroll through of the available priority choices, and press
Sel
The new channel becomes a member of the scan list assigned
to the selected channel when scan list programming was
entered.
Note: If a scan list is full, you will hear a bad-key chirp each time
you press
assigned to the list.
5 Press either
programming and return to normal scan operation.
34
Scan
or Zone
to add the channel.
to choose one.
, and the desired channel will not be
Sel
or
Scan
until the scan indicator blinks and a
down button to change zones, then
to exit scan list
HOME