Selecting Enable And Disable (Digital Modes Only); Requesting A Dynamic Regrouping (W7 And W9 Control Heads Only) (Digital Modes Only) - Motorola ASTRO XTL 5000 User Manual

Selecting Enable and Disable (Digital Modes Only)

The dispatcher may classify regrouped units into one of two
categories: select-enabled or select-disabled.
Select-enabled
Select-disabled
Requesting a Dynamic Regrouping
(W7 and W9 Control Heads Only) (Digital Modes Only)
Press
Rpg
A high-pitched tone sounds, indicating your request was received by
the system's central controller.
The display changes to RPGM (W7) or RPGM RQST (W9) while the
request is being processed.
If the regrouping request is acknowledged, a dispatcher-
acknowledge signal sounds (four high-pitched tones), and the
display shows ACK RCVD.
The radio then returns to normal operation.
ASTRO XTL 5000 Digital Mobile Radio with W4, W5, W7, and W9
Units are free to make mode changes to any of
the available talkgroups, including the dynamic
group.
Units cannot change modes because the
dispatcher has specifically chosen to force the
unit to remain in the dynamic mode.
(W7) or
Rpgm
Trunking Operation
(W9) to request regrouping.
83